DOC to Any Converter

How to cover a picture with a red circle refering to VeryDOC to any converter

When teaching somebody how to use VeryDOC to any converter you will depend upon the pictures for clearer effect. Here I tell it that how to cover a picture with a red circle.

Click the start content, choose accessory column from all programs column, then you will see another content on the right, select the paint column and click it. Or you can directly find the paint column from the click of the start content.

How to cover a picture with a red circle refering to VeryDOC to any converter

Method 1, choose the All Programs, you will see on its right the accessory column and further see the paint column.

 

How to cover a picture with a red circle refering to VeryDOC to any converter

Method 2, choose directly the Paint column if the paint column in advance is set.

 

How to cover a picture with a red circle refering to VeryDOC to any converter

Then you will see the paint page.

When these steps have been finished,  you choose a picture that you want to cover with a red circle, and then through Ctrl + Alt + A for putting the picture in a new place, afterward press Ctrl + V under the space of the paint page marked by the white color part, it comes as below:

How to cover a picture with a red circle refering to VeryDOC to any converter

The picture and the paint page now are bound together.

Next are the operations going under the paint page, select the circle figure with your fond color, when the cursor is changed into cross shape, then you can circle any place of the picture according to your like.

How to cover a picture with a red circle refering to VeryDOC to any converter

 

At last orderly you press Ctrl + A and Ctrl + C under the page mentioned above, then press Ctrl + V in the space where you want to paste the finished picture. That’s all.

Have you any barrier to teach people use the VeryDOC to any converter?

PDF to Word Converter

How to convert a page range from PDF file to Word document?

Under some circumstances, you may need to convert some pages of a PDF file to word document. This article aims to share some tips with you on how to convert a page range from PDF file to Word document.

Step 1: Open the PDF file, find the pages you want to convert and remember the numbers of the first and last pages. Sometimes, you may find that the page numbers of the whole file are different from the page numbers of the body. So, please pay attention that the number of the page here refers to the  number shown in the up-left corner of the interface and it may not be the same as the number of page of the body. 

How to convert a page range from PDF file to Word document?

Step 2: Close the PDF file, and run the VeryDOC PDF to Word Converter application. Don’t forget to close the PDF file before you run the convert application. 

Step 3: Add the PDF file into the list box.

Step 4: Look at the right part of the interface, you can find four columns  and the  third column is Page Range .Click on the round button preceding the second item Select Range. Then, a white dot will appear in the center of this button and the color of “From” and “To”becomes black.

How to convert a page range from PDF file to Word document? How to convert a page range from PDF file to Word document? How to convert a page range from PDF file to Word document?

Step 5: Now, you can select the first and last number of those pages you want to convert in the added boxes following “from” and “to”respectively. Again, please make sure that the page numbers are the right ones.

Step 6: Click the Convert button and save the new Word document.

DOC to Any Converter

A particular I meet about use of VeryDOC to any converter

I once did the operation about mutual conversion of the document format with the helpful software of VeryDOC to any converter, but it failed. After my inspection I still confused, my all operation were the same with the sample case, at the beginning I suspected my laptop had mistake or something  wrong of mine, for a while I was sure my mind and other state were no problem, so I seriously operated again as the instruction told, many trying later however, the result is unchangeable.

In order to exclude breakdown of my laptop, I had run other programs, through the suspension that pointed to my laptop and myself which proved they were innocent, I began to censure the producer of VeryDOC to any converter and further to curse the supervial department who deceive society and are mercenary. The time passed without any feeling, when I was quiet than just,  I reflected the years I had underwent , yes I was not good and always liked selecting others’ fault but myself, more satirically in the end the reason always lied in myself.  Being filled with the unyielding attitude I decided to check the reason again with my humble heart, accompanying with the mysterious sensation no person can tell it comes from soul or the God, I suddenly found the difference compared with the sample case, at the moment I was so happy that had disregarded  the reason whether it lied in me or not?  I only want to operate it again.

The problem is my ignorant computer knowledge, that request every command among which a space key input is must,  this is the very particular I meet.

Now the satisfactory result appeared, but I was not happy as supposed before it, I once more recognized myself, as if an indescribable thing echoed around me.

PDF to Vector Converter

How to convert PDF file to a new PDF file?

There exist many ways to accomplish this conversion. I want to advice you three simple ways.

The first is to use the function of “copy-paste”. For example, the original pdf file is called test.pdf which is in the folder test of disc d.

Firstly, copy it. There are two steps you need to do.1) Find test.pdf and right click on it. 2) Check the label copy on the popup menu and click. Or, press “ctrl + c" simultaneously.

Last, paste one. There are two too.1) Get to the location you want to put. 2) Right click on a blank place and press the label paste on the spread menu.  Or press “ctrl +v”at the same time.

Then it is done. You can change its first name by using the rename label on the same menu according to your like.

The second is to use the label “save as”. The specific details are:

1) Open a pdf file and click on the label file.

How to convert PDF file to a new PDF file?

2) Click on the label “pdf…”on the following menu which come out when you click on “save as” label. At this time a box called save as will be shown.

How to convert PDF file to a new PDF file?

3)When everything has been done, press save.

The last is to use a software called VeryDOC pdf to vector converter. The specific operation can refer to this website:

https://www.verydoc.com/blog/how-to-convert-pdf-file-to-pcl-file.html

In this issue, there two operation you need to finish. 1. Change the last filename in “d:\test\test.pcl”, .pcl, to .pdf in window 4. 2.Modify the first filename or the location of this new pdf file. Be mindful to modify at least one.

PDF to Vector Converter

How to convert PDF file to PCL file?

Pcl format, a standard printer controller language, is used for its simpler, faster and cheaper features while pdf file is seen everywhere for supporting photographic images, graphics, and color profiles. It is very practical to implement the conversion between two formats. Here converting pdf file to pcl file is a topic. Before the topic is spread, the first question is whether you have at least one convert software or not. If not, VeryDOC pdf to vector converter is a better choice. Surf in the two sites to own it. Make sure that there is an .exe file in the opened folder which has been uncompressed. It is the execute program to do this conversion.

https://www.verydoc.com/pdf-to-vector.html
https://www.verydoc.com/pdf2vec_cmd.zip

Then we need to talk of its operation. That is how to operate it.

First, run .exe file (the execute program). If you have some dos commands, it will be easy. If not ,it doesn’t matter. You just need to refer to these operation step by step.

Hit the start button on desktop and you will get a picture below:

How to convert PDF file to PCL file?

Click on the run label which is against the background of the dark blue and a box marked as run will be before your eyes. Punch in cmd and then press the OK button.

clip_image007

Second and last, we need to execute the command  of conversion.

Primarily, it is to make sure that the program running is happening under the directory of .exe file. there will be a command window after your pressing OK. please operate the window in the light of these following windows.

window 1:

How to convert PDF file to PCL file?

window 2:

How to convert PDF file to PCL file?

window 3:

How to convert PDF file to PCL file?

Tips: The precondition of “cd pdf2vec” is that there has been a pdf2vec folder  in disc d where  .exe file is stored.

Right behind the upper step, we should run it following window 4.

window 4:

How to convert PDF file to PCL file?

After tapping in an enter key, the job is done.

Some comments about window 4: pdf2vec.exe is the name of .exe file. d:\test\test.pdf is the storage path of test.pdf you need to convert. d:\test\test.pcl is the storage path of test.pcl converted.

If you do not understand the storage path, refer to these immediate picture:

How to convert PDF file to PCL file?

For instance, Test.pdf added to the content which is circled by a red square is the storage path of test.pdf.

Finally Every fault comes from small details. So watch carefully.