DOC to Any Converter

A way to convert MS Office 2010 and Office 2007 xlsx to emf and rotate page of emf

Posted on

This article aims to introduce a way to convert Office 2007 and Office 2010 xlsx to emf and rotate page of emf one time with the command line.

First, you need to download DOC to Any Converter Command Line via clicking this link, which is our main tool in this process: https://www.verydoc.com/doc2any_cmd.zip, then, please extract the content in this zip file to your computer, and later, you can call “doc2any.exe” that is in folder “doc2any_cmd” directly.

And in Windows systems, the command prompt window is the operating environment of DOC to Any Converter Command Line. You need to open it firstly if you want to use DOC to Any Converter Command Line. And you can follow the steps below to run it:

click “start” > select “Run” > type “cmd.exe” > click “ok”

Next, in the command prompt window, you can type the relative command line to process your task. However, you need to know this whole process:

call “doc2any.exe” –> rotate emf page –> add single xlsx file –> select a targeting folder and name emf files –> process this task with one click

As you see, firstly, you need to call “doc2any.exe” in the command prompt window, because it helps you launch DOC to Any Converter Command Line. And you can type its path into the command prompt window, then click “space”; after running DOC to Any Converter Command Line, you need to type a parameter in order to prepare to rotate page of emf, which is “-rotate <int>”, here “<int>” should be an angle, and then click “space”; to add single xlsx file, please type the path of this single xlsx file into the command prompt window directly, and likely please click “space”; then type a targeting path to select an objective folder and name emf files in the command prompt window, and click “space” in the command prompt window; at last, please click “enter” to finish the typing and process this task, which is from Office 2007 and Office 2010 xlsx to emf. And then you can get your emf files produced into your objective folder. And if the illustration above can not make you understand better, I think you can refer to the following command lines:

G:\doc2any_cmd\doc2any.exe –rotate 90 F:\input5\in.xlsx F:\output5\out.emf

G:\doc2any_cmd\doc2any.exe –rotate 180 D:\in3\in2.xlsx D:\out\out2.emf

However, DOC to Any Converter Command Line can not only process the single task, but also process the batch conversion quickly. If you want to convert xlsx files to emf files in batches, you can refer to the following command line:

G:\doc2any_cmd\doc2any.exe –rotate 180 D:\in3\*.xlsx D:\out\*.emf

  • D:\in3\*.xlsx is the universe path of all xlsx files, and the character “*” is the key point to make this universe source path
  • D:\out\*.emf is the uniform objective path for saving all the emf files, where “*” is the key point, too
  • the precondition to process the batch task, is the source files need to be in an uniform folder

Finally, please do not forget one click on “enter” to convert xlsx files to emf files in the command prompt window.

By now, it is nearly an end for this article, and here is the link about the homepage of DOC to Any Converter Command Line: https://www.verydoc.com/doc-to-any-options.html, where you can find more parameters and more information of DOC to Any Converter Command Line. And if you have any questions about this process, which is a conversion of Office 2007 and Office 2010 xlsx to emf and rotate page, please drop your comment here, thank you for your support!

DOC to Any Converter

Do you know how to convert MS Office 2007 and Office 2010 pptx to tga and rotate page of tga conveniently?

Posted on

Well, if you want to convert MS Office 2007 and Office 2010 pptx to tga and rotate page of tga conveniently, you can use DOC to Any Converter Command Line. With DOC to Any Converter Command Line, you can process this task within a few minutes only. To know more details, please read the following paragraphs.

First, you need to know the precedure about this process, which is as follow:

download DOC to Any Converter Command Line > open the command prompt window >call “doc2any.exe” > prepare to rotate tga page > add the source file > select a targeting folder for tga > one click to process the task

Then, based on the precedure above, there are some tips I need to mention essentially:

  • If you do not have DOC to Any Converter Command Line in your computer, you need to download it from this link: https://www.verydoc.com/doc2any_cmd.zip, then please exact the relative folder from this zip to your computer in order to prepare to call “doc2any.exe” later
  • The command prompt window is the running environment of DOC to Any Converter Command Line. You need to start DOC to Any Converter Command Line in it, thus it is essential to open it in your computer: click “Windows + R” > type “cmd.exe” or “cmd” > click “ok”, then the command prompt window can be popped out
  • Then, to launch DOC to Any Converter Command Line, you can call “doc2any.exe” in the command prompt window. Thus, you can input the path of “doc2any.exe” into the command prompt window
  • Then, you need to prepare to rotate page of tga. And to realize it in the command prompt window, please type the relative parameter “-rotate <int>”, where “<int>” can be an angle, e.g., 90, 180. Also you can type other parameters to edit the options of tga files
  • To add the source file for the conversion, please type its path into the command prompt window, or just drag and drop it into the command prompt window directly
  • To select a targeting folder for tga, please input an objective path in the command prompt window, which also help you name tga files together
  • After all the basic work is done correctly, please click “enter” in the command prompt window, then DOC to Any Converter Command Line can start to convert Office 2007 and Office 2010 pptx to tga and rotate tga page

If you feel a little confused, please refer to the followings, which are all about this process:

D:\doc2any_cmd\doc2any.exe –rotate 90 G:\ab\in.pptx G:\ab\out.tga

D:\doc2any_cmd\doc2any.exe –rotate 270 G:\input5\in1.pptx G:\output5\out1.tga

So far, if you want to know more parameter besides “-rotate <int>”, which is used in this process of Office 2007 and Office 2010 pptx to tga and rotate page of tga, you can visit the homepage of DOC to Any Converter Command Line via this link: https://www.verydoc.com/doc-to-any-options.html, where you can also know more information of DOC to Any Converter Command Line directly.

DOC to Any Converter

Convert MS Office 2010 docx and Office 2007 docx to bmp and rotate page of bmp

Posted on

With DOC to Any Converter Command Line, you can convert Office 2007 and Office 2010 docx to bmp and rotate page of bmp within only a few steps in your computer of Windows platforms. Besides, DOC to Any Converter Command Line can help you process this task during one process. So if you want to know more, you can continue to read this article.

First, you can click this link to download a zip about DOC to Any Converter Command Line: https://www.verydoc.com/doc2any_cmd.zip, then extract it to a targeting folder in your computer, then you can find a folder named “doc2any_cmd”, and later, you can call “doc2any.exe” directly, which is in the folder of “doc2any_cmd”.

Second, please click “Windows + R” to start a dialog box named “Run”, then input “cmd.exe” or “cmd” and click “ok” in the dialog box of “Run”, then the command prompt window can be opened, which is the operating environment of DOC to Any Converter Command Line.

At last, you can follow the precedure to convert Office 2010 and Office 2007 docx to bmp and rotate page of bmp files,

call “doc2any.exe” > prepare to rotate bmp page > add the source file > select objective folder for bmp files> one click to process this task

And here is the relative command line below, which you can refer to:

G:\doc2any_cmd\doc2any.exe D:\input1\in.docx D:\output1\out.bmp

  • G:\doc2any_cmd\doc2any.exe is the path of “doc2any.exe”, which can help you call “doc2any.exe” in order to launch DOC to Any Converter Command Line
  • -rotate 90 is the parameter to prepare to rotate page of bmp with the angle “90”, also you can change 90 to another angle, e.g., 180 
  • D:\input1\in.docx is the path of single docx file used to add the source file
  • D:\output1\out.bmp is the objective path used to select objective folder for bmp files and name bmp files

After you finish all the basic work like above, please click “enter” in the command prompt window, and later, bmp files can be added into the objective folder in your computer.

By now, this article has nearly come to the end here, and besides this process, which is from Office 2010 and Office 2007 docx to bmp and rotate page of bmp, DOC to Any Converter Command Line also support other kinds of conversions and editing other properties of the objective files. If you want to know more in this aspect, you can visit the homepage of DOC to Any Converter Command Line through this link: https://www.verydoc.com/doc-to-any-options.html.

DOC to Any Converter

Convert text to pcx and rotate page of pcx

Posted on

DOC to Any Converter Command Line could not only convert Office files to pdf or flash files, but also convert them to image files. Moreover, it supports editing the objective properties. With DOC to Any Converter Command Line, you can process this kind of tasks very conveniently and quickly with no errors!

Here are the several steps to convert text to pcx and rotate page of pcx with DOC to Any Converter Command Line below:

Step1. Download DOC to Any Converter Command Line

If you have no DOC to Any Converter Command Line, you need to download it firstly from this link: https://www.verydoc.com/doc2any_cmd.zip, then extract this zip to your computer so that this program “doc2any.exe” can be called directly and conveniently in your computer.

Step2. Open the running environment of DOC to Any Converter Command Line

After you extract that zip to your computer, please run “cmd.exe” to open the command prompt window in your computer, for in Windows systems, the command prompt window is the operating environment of DOC to Any Converter Command Line. Thus, please refer to the following to open the command prompt window:

click “start” > select “Run” > type “cmd” > click “ok”

Step3. Type the command line to process the task

After the command prompt window is opened, you need to follow the precedure below to type the command line in the command prompt window:

call “doc2any.exe” > rotate pcx page > add single text file for this process > select a destination folder

  • To run DOC to Any Converter Command Line in the command prompt window, you need to call “doc2any.exe”, and in the command prompt window, you can realize it through typing the path of “doc2any.exe” directly
  • to rotate page of pcx, you need to input a parameter into the command prompt window, which is “-rotate <int>”, and <int> is a angle, e.g., 90 or 180
  • to add single text file for this process, you need to type the path of this single text file into the command prompt window
  • to select a destination folder for pcx files, please input a targeting path in the command prompt window, which also help you name pcx files flexibly

Here is the relative example below:

d:\doc2any_cmd\doc2any.exe –rotate 90 f:\input\a.txt f:\output\a.pcx

To process the task of text to pcx with DOC to Any Converter Command Line, please click “enter” in the command prompt window.

Anyway, when you prepare to rotate pcx page with that parameter, you can also input other parameters to edit other properties of the pcx files, if you would like. And if you do not know many parameters, you can log on the website of DOC to Any Converter Command Line from this link: https://www.verydoc.com/doc-to-any-options.html, where you also can know more conversions besides this process from text to pcx and rotate page with DOC to Any Converter Command Line.

DOC to Any Converter

Convert txt to tga and rotate page of tga in batches

Posted on

To convert txt to tga and rotate page of tga in batches, you can use DOC to Any Converter Command Line. And DOC to Any Converter Command Line needs to be used in Windows platforms, which can help you create popular files from files supported by Office or OpenOffice software singly or in batches. With DOC to Any Converter Command Line, you can convert txt file to tga file and rotate tga page in batches within one process.

With several steps, you can process this task simply in your computer of Windows systems. Here is the precedure below:

download DOC to Any Converter Command Line > run “cmd” > call “doc2any.exe” > rotate tga page > add the source files > save objective tga files > one click to process this task

As you see, firstly, please download DOC to Any Converter Command Line from this link, if DOC to Any Converter Command Line is not in your computer: https://www.verydoc.com/doc2any_cmd.zip. Then, please extract this zip file to your computer, and then “doc2any.exe” can be called anytime if you need.

In Windows systems, you need to run “cmd” in your computer to open the operating environment of DOC to Any Converter Command Line. To run it, please click “start” > select “Run” > type “cmd” and click “ok” in the dialog box “Run”, then the environment can be opened automatically.

Next, in the command prompt window, you need to call “doc2any.exe” to launch DOC to Any Converter Command Line. To realize it in the command prompt window, you need to input its path in the command prompt window. Then, please type this parameter “-rotate <int>” to rotate page of tga, “<int>” can be 90 or 180 etc., also you can input other parameters to edit other properties of tga images; to add the source files in batches, first, please make all of the source files in the uniform folder, then type the path of this folder into the command prompt window, then input this character “*” and the file extension of the txt files; then, it’s time to save tga files, and you can realize it by the way of typing an objective path with “*” into the command prompt window. If you feel confused, please refer to the following:

G:\doc2any_cmd\doc2any.exe –rotate 270 F:\in5\*.txt F:\out5\*.tga

After you finish typing the paths like above, you can click “enter” in the command prompt window, then DOC to Any Converter Command Line can convert txt to tga in batches quickly.

After you know the method to convert txt to tga and rotate page of tga in batches, you may want to know more about DOC to Any Converter Command Line, and other conversions with DOC to Any Converter Command Line, so it is convenient to click the following link to go to the homepage of DOC to Any Converter Command Line: https://www.verydoc.com/doc-to-any-options.html, where also you can know more parameters compatible with DOC to Any Converter Command Line.