XPS to PDF and Image Converter

How to convert XPS to PDF with command line?

Posted on

VeryDOC XPS to PDF Converter is best solution to convert XPS to PDF with command line here on Windows platforms than you can ever expect!

VeryDOC XPS to PDF Converter can be used to singly or batch convert XPS file to PDF file with proper options. Through VeryDOC XPS to PDF Converter, produced PDF files could be high-qualified, optimized, vector based PDF files. Besides, VeryDOC XPS to PDF Converter is a standalone application that can run normally and smoothly for related conversions without third-party software. Here, I can provide you with free trial version VeryDOC XPS to PDF Converter for your try conveniently:

Download VeryDOC XPS to PDF Converter to convert XPS to PDF

Want to follow me to convert XPS file to PDF file through commands on your own? Then, just do not go away and keep reading this article here:

1. Open running environment of commands

Click Start in your computer > type cmd.exe > click ok, then Command Prompt window could pop out automatically.

2. Type commands directly in Command Prompt window

To make VeryDOC XPS to PDF Converter be effective later, you need to follow steps below to input commands in Command Prompt window:

  • Type path of “xps2pdf.exe” in order to run VeryDOC XPS to PDF Converter
  • Input parameters in order to edit properties of PDF file optionally, of course, to only convert XPS file to PDF file without properties edited, please skip to next step directly
  • Input source path of XPS file for adding it for this conversion
  • Type targeting path of PDF file for saving PDF file later after conversion from XPS file to PDF file

Here is commands example to use VeryDOC XPS to PDF Converter to convert XPS file to PDF file:

D:\xps2pdf\xps2pdf.exe C:\in\source1.xps C:\out\target1.pdf

Here is commands example to use VeryDOC XPS to PDF Converter to produce PDF file from XPS file and edit PDF producer:

D:\xps2pdf\xps2pdf.exe –producer “verydoc.com” C:\in\source1.xps C:\out\target1.pdf

(note: –producer “verydoc.com” helps you edit PDF producer as “verydoc.com” directly during conversion form XPS file to PDF file with commands)

If this description, which is about using VeryDOC XPS to PDF Converter to convert XPS file to PDF file with commands, arouses your interest to know more practical functions and more converter, please visit here frequently. Thank you for your support here!

PostScript to PDF Converter

How to convert PostScript to PDF files of single page?

Posted on

Want to convert PostScript to PDF files of single page through command line? VeryDOC Postscript to PDF Converter helps you with that professionally.

VeryDOC Postscript to PDF Converter allows you to produce PDF files from PostScript files singly or in batches on Windows platforms through command line. Of course, VeryDOC Postscript to PDF Converter helps you edit properties of PDF files, e.g., single page, width and height etc.. Thus, if you would like to do operations with VeryDOC Postscript to PDF Converter by yourself, it is simple for you to download package of VeryDOC Postscript to PDF Converter, then unzip content to your computer, so VeryDOC Postscript to PDF Converter could be used later.

Only several steps enables you to accomplish conversion from PostScript file to PDF file of single page through commands, if you want to know more, please follow me:

Step1. Open Command Prompt window

It is simple to follow steps below to open it in your computer: click Windows + R > input cmd and click ok in pop dialog box, then operating environment of commands – Command Prompt window is opened on screen.

Step2. Refer to following commands to fulfill conversion from PostScript file to PDF file by yourself

D:\ps2pdf\ps2pdf.exe –burstpdf D:\ps2pdf\test.ps D:\testinput1.pdf

where:

  1. D:\ps2pdf\ps2pdf.exe directory of “ps2pdf.exe”, which is used to run VeryDOC Postscript to PDF Converter
  2. –burstpdf parameter to make single page PDF file during conversion from PostScript file to PDF file with commands
  3. D:\ps2pdf\test.ps directory of source PS file, which is typed for adding PS file for conversion
  4. D:\testinput1.pdf directory of targeting PDF file, which is used for saving PDF file
  5. -burstpdf parameter to burst PDF file into single page PDF files

After you finish typing commands of yours like shown above, click enter in Command Prompt, then VeryDOC Postscript to PDF Converter is able to help you convert PostScript file to PDF file of single page with commands.

Thank you for reading this article, and here is freely download entrance of VeryDOC Postscript to PDF Converter:

Download VeryDOC Postscript to PDF Converter to convert PostScript to PDF

PostScript to PDF Converter

How to convert PostScript to PDF and merge PDF files?

Posted on

VeryDOC Postscript to PDF Converter easily convert PostScript to PDF and merge PDF files through command line. Want to know more details about it, please keep reading this article here.

To freely try VeryDOC Postscript to PDF Converter, please access download entrance:

Download VeryDOC Postscript to PDF Converter

Then, to use this free VeryDOC Postscript to PDF Converter to convert PostScript file to PDF file and merge files of PDF, just go to read following paragraphs.

1. Run Command Prompt window

Please click start > select Run > input cmd.exe > click ok, so Command Prompt window pops out automatically.

2. Type commands to use VeryDOC Postscript to PDF Converter to convert PostScript file to PDF file

There are 2 steps here to produce merged PDF file:

  • First, here are some typical examples to help you convert PostScript file to PDF file:

D:\ps2pdf\ps2pdf.exe C:\a.ps C:\a.pdf

D:\ps2pdf\ps2pdf.exe C:\b.ps C:\b.pdf

D:\ps2pdf\ps2pdf.exe C:\c.ps C:\c.pdf

  • Then, after you produce PDF file from PostScript file separately, you can refer to following commands to merge produced PDF files:

D:\ps2pdf\ps2pdf.exe –mergepdf “C:\a.pdf|C:\b.pdf|C:\c.pdf” C:\outmerge.pdf

D:\ps2pdf\ps2pdf.exe –mergepdf “C:\*.pdf” D:\outmerge1.pdf

where:

–mergepdf “C:\a.pdf|C:\b.pdf|C:\c.pdf”: Merge several PDF files into one PDF file

–mergepdf “C:\*.pdf”: Merge dozens of PDF files under folder into one PDF file

After you finish converting PostScript file to PDF file and merge files of PDF into one PDF file, you can notice that VeryDOC Postscript to PDF Converter is so smart and easy-to-operate through commands, right? To know more supported parameters about merging PDF files or other functions about VeryDOC Postscript to PDF Converter, welcome to go to homepage of VeryDOC Postscript to PDF Converter.

PostScript to PDF Converter

How to convert PostScript to PDF and remove empty pages of PDF?

Posted on

This article is about using VeryDOC Postscript to PDF Converter to convert PostScript to PDF and remove empty pages of PDF conveniently on Windows platforms.

Here is download entrance of VeryDOC Postscript to PDF Converter:

Download VeryDOC Postscript to PDF Converter to convert PostScript to PDF

VeryDOC Postscript to PDF Converter is able to convert PostScript file to PDF file variously and flexibly on Windows platforms. Furthermore, PDF popular properties, e.g., PDF encryption, PDF information, PDF rotation etc., could be customized professionally than you expect ever. To know how VeryDOC Postscript to PDF Converter work and how to use VeryDOC Postscript to PDF Converter to convert PostScript file to PDF file and remove empty pages of PDF file with command line, here are details below:

1. Run Command Prompt

Click start in your computer, then choose Run on start menu so that Run dialog box pops out, where you need to input cmd and click ok, then Command Prompt window pops on your screen directly.

2. Start to convert PostScript file to PDF file via commands

First, please see following examples of commands:

D:\ps2pdf\ps2pdf.exe -noempty C:\input\source1.ps C:\output\target1.pdf

(note: -noempty: parameter to remove empty pages from PDF file)

Second, you can copy and paste commands example above into your Command Prompt window directly, then change related directories, e.g., “ps2pdf.exe” path, PS file path, PDF file path flexibly, then click enter in Command Prompt window so that VeryDOC Postscript to PDF Converter helps you convert PostScript file to PDF file and remove empty pages of PDF file with commands, then you can find that your PDF file does not contain empty pages of PostScript file.

By now, as you can tell, it is simple and easy to use VeryDOC Postscript to PDF Converter to convert PostScript file to PDF file and remove empty pages of PDF file, so please do not miss this chance to try VeryDOC Postscript to PDF Converter here.

PostScript to PDF Converter

How to convert PostScript to PDF and rotate PDF pages?

Posted on

VeryDOC Postscript to PDF Converter allows you to smoothly convert PostScript to PDF and rotate PDF pages one time in Windows systems.

In the following paragraphs, I will show you how to use VeryDOC Postscript to PDF Converter to convert PostScript file to PDF file and rotate PDF pages with command line.

Step1. Download VeryDOC Postscript to PDF Converter

Click the following download icon so that package of VeryDOC Postscript to PDF Converter can be downloaded directly. Then, extract its content to your computer, then VeryDOC Postscript to PDF Converter can run in your computer.

Download VeryDOC Postscript to PDF Converter to convert PostScript to PDF

Step2. Run cmd.exe in your computer

To run cmd.exe helps you open Command Prompt window, which is running environment of commands on Windows platforms:

Click Windows + R hotkey in order to open Run dialog box, then input cmd.exe in it and click ok.

Step3. Convert PostScript file to PDF file and rotate PDF pages with commands

Here is example of commands for you to refer to:

D:\ps2pdf\ps2pdf.exe -rotate 90 F:\input\example1.ps C:\output\example1.pdf

In the commands example above:

  • -rotate <int>: parameter to rotate pages by 90, 180, 270 separately
  • D:\ps2pdf\ps2pdf.exe: path of “ps2pdf.exe” used to run VeryDOC Postscript to PDF Converter
  • F:\input\example1.ps: path of source PS file for adding it
  • C:\output\example1.pdf: path of targeting PDF file for saving PDF file

After you refer to example commands above to input your own commands in Command Prompt window, and check them correctly, you need to click enter in it in order to make VeryDOC Postscript to PDF Converter begin to convert PostScript file to PDF file and rotate PDF pages directly through commands and parameters.

If you want to convert PostScript file to PDF file and rotate PDF pages through commands, only several steps are needed like above after you download VeryDOC Postscript to PDF Converter into your computer, then you can find VeryDOC Postscript to PDF Converter is so smart by yourself!