PDF to EPUB Converter

How to convert encrypted PDF to ePub

Posted on

It is not complicated to use VeryDOC PDF to ePub Converter to convert encrypted PDF to ePub through GUI interface in Windows systems. 🙂

First of all, please feel free to download installer of trial version of VeryDOC PDF to ePub Converter:

abcxdf 

Then, double-click this installer in your computer so that after setup wizard, trial version of this application could be installed in your computer. 🙂

Next, if you are interested in how to realize converting encrypted PDF files to ePub files through GUI interface, please follow my thread in the following paragraphs:

1. Run software and add encrypted PDF file

Double-click shortcut of this application, then, GUI interface could be opened on screen, where you need to do followings to add source PDF file:

Click Add PDF File(s) > select encrypted PDF file in pop dialog box > click Open, so encrypted PDF file could be added as paths in processing table of GUI interface. 🙂

2. Type open password of added PDF file

After adding source PDF file, please type open password of this PDF file in edit box PDF Password, then, you can continue the next step. 🙂

Convert encrypted PDF to ePub through GUI interface of VeryDOC PDF to ePub Converter

3. Convert encrypted PDF file to ePub file

After all prepared work like above is done, please click Convert on GUI interface so that after you select destination folder in pop dialog box and click OK, VeryDOC PDF to ePub Converter could help you convert encrypted PDF file to ePub file directly. And after a few seconds, perfect ePub file, which could be previewed in iPhone, iPod, iTouch, etc., can be produced into targeting folder. 🙂

Finally, to know more articles about this software, please keep visiting here. And for full version of VeryDOC PDF to ePub Converter, please go to purchase page of VeryDOC PDF to ePub Converter. And thank you for reading this article, which is about how to convert encrypted PDF to ePub through GUI interface.

PDF to EPUB Converter

How to convert specified pages PDF to ePub through GUI

Posted on

It is easy to use VeryDOC PDF to ePub Converter to convert specified pages PDF to ePub through GUI interface on Windows platforms.

To know more details, please do not hesitate to read the followings:

Step1. Install trial version software

Here is download entrance of trial version below:

Download VeryDOC PDF to ePub Converter

Then, after you install this software in your computer, you can use it for later process.

Step2. Open software to add PDF files

Please open GUI interface of this application on screen, then, click Add PDF File(s) on GUI interface > select PDF files in pop dialog box > click Open, and then, selected PDF files could be added into processing form as paths. Here is relevant snapshot below:

Convert specified pages PDF to ePub through GUI interface of VeryDOC PDF to ePub Converter

Moreover, to add PDF files quickly, you can drag and drop PDF files into processing form directly. 🙂

Step3. Set specified pages of PDF

After adding, please click radio Select Range > type page numbers in edit-boxes From and To, and then, it is prepared to set specified pages of added PDF files, which is as shown in picture above. 🙂

Step4. Convert specified pages PDF files to ePub files through GUI

When all the basic work is done, please click Convert on GUI interface, and then, select right folder in pop dialog box as targeting folder > click OK, later on, specified pages PDF files could be converted to ePub files, which could be added into targeting folder.

And then, produced ePub files could be read in many portable devices, e.g., iPhone, iPod, iTouch, etc.. 🙂

At last, thank you for reading this article, which is about how to use VeryDOC PDF to ePub Converter to convert specified pages PDF files to ePub files through GUI interface on Windows platforms. And for articles about this software, please feel free to visit here frequently. Finally, please do not hesitate to click following icon, if you want to buy full version of this software. 🙂

Purchase VeryDOC PDF to ePub Converter

PDF to EPUB Converter

How to convert PDF to ePub files compatible with Apple devices

Posted on

VeryDOC PDF to ePub Converter allows Windows users to convert PDF to ePub files singly or in batches which are compatible with Apple devices. To know more, please feel free to read the followings. 🙂

VeryDOC PDF to ePub Converter converts Adobe PDF files to ePub format for viewing on electronic books (eBooks) readers (iPad, iPhone, iPod Touch, Sony Reader, etc.), which can quickly and easily convert your PDF files to ePub format, so you can view them on any eBook readers which compatible with ePub. Moreover, this utility preserves the original text, layout and images in the output ePub eBooks.

Here is download entrance of trial version of this application below:

Download trial version of VeryDOC PDF to ePub Converter

And then, there are only several clicks you need to take in such easy-to-handle conversion, which are as follows:

Step1. Open GUI interface to add PDF files

Double-click shortcut of this software, and then, click Add PDF File(s) on GUI interface > select source PDF files in pop dialog box > click Open in dialog box, finally, PDF files could be added as paths in processing form like below:

Convert PDF to ePub singly or in batches through GUI interface of VeryDOC PDF to ePub Converter

Step2. Optionally set conversion mode

After adding files, you can optionally set conversion mode, e.g., consider text and images of PDF files to epub files (click radio Text and images to epub), or just make each page as an image to convert to epub files (click radio Each page as an image to epub), etc.. Also, you can set PDF page range for conversion, which could be seen in other articles here. 🙂

Step3. Convert PDF files to ePub files

Finally, after all basic work is done, please click Convert on GUI interface so that targeting folder could be set in pop dialog box, and after you click OK there, all ePub files could be automatically added into destination folder directly.

Did you try this conversion by yourself through VeryDOC PDF to ePub Converter? Is it very simple to accomplish converting PDF files to ePub files? Finally, to buy full version of this software, for trial version only provide you with conversions of previous pages of PDF files, please feel free to click following icon:

Purchase VeryDOC PDF to ePub Converter

Office to PDF Converter

How to watermark PDF during converting Office/image to PDF

Posted on

This article helps you convert Office/image to PDF and watermark PDF through GUI interface of VeryDOC Office to PDF Converter on Windows platforms.

First of all, to use this software to follow me in the next paragraphs, please download installer of this software from the following icon:

Download installer of VeryDOC Office to PDF Converter

Then, double-click this installer and follow setup wizard step by step till trial version of this software is installed in your computer.

And then, you can start to use this software to convert Office/image files to PDF files through the following steps:

Step1. Run software and add source files

Please open GUI interface of this application, and then, click Add files on GUI interface > select Office/image files in pop dialog box > click Open, so finally, selected files could be added as paths in processing form directly.

Here is related picture you can refer to below:

Convert Office/image to PDF and watermark PDF through GUI interface of VeryDOC Office to PDF Converter

Step2. Watermark PDF files

After adding files, please click Setting so that you can watermark PDF in specific and flexible mode:

On pop Option panel, please click tab Watermark, then, you need to click check-box Add watermark so that all related edit-boxes or dropdown list could be activated. Then, you can watermark PDF files through Page begin, Page end, Watermark, Position, Size, color, Font, etc., and for instance, to get dynamic watermark on pages of PDF files, please click Macros > select one of options on dropdown list there, and then, in edit box Watermark, selected one could display in there, which is format of your later watermarks. 🙂

Here is related picture below:

Watermark PDF files during converting Office/image to PDF through GUI interface of VeryDOC Office to PDF Converter

Step3. Convert Office/image files to watermarked PDF files

After all basic work is done like above, please click Convert to PDF And Save As on GUI interface, and after you set targeting folder in pop dialog box, please click OK there so that VeryDOC Office to PDF Converter starts to convert Office/image files to PDF files with specific watermark, and produced PDF files could be added into targeting folder. 🙂

To know more about this software, please visit here frequently. And to know more other articles about other software, welcome to visit here, too. At last, please feel free to get full version of VeryDOC Office to PDF Converter from following icon, if you want to buy it:

Purchase VeryDOC Office to PDF Converter

Office to PDF Converter

How to customize PDF page number when converting Office/image to PDF

Posted on

Wanna know how to customize PDF page number when converting Office/image to PDF through GUI interface? Then, it is convenient to read this article here. 🙂

Our main tool here is VeryDOC Office to PDF Converter, which allows you to convert Office to PDF and image files to PDF files with targeting properties, e.g., PDF page number, PDF information, etc.. So now, if you want to know how to realize setting page number of produced PDF from Office/image, welcome to continue to read the followings:

Step1. Download and install

Please download installer of this software from the following, then double-click it to install it in your computer so that you can use it later.

Download installer of VeryDOC Office to PDF Converter

Step2. Run software and add Office/image files

Run this software and then, add Office/image files through GUI interface:

Click Add files on GUI interface > select Office files or image files in pop dialog box > click Open, then selected files could appear in processing form.

Or you can drag and drop Office/image files into processing form directly, which is an easy way to add source files for conversion.

Here is relevant snapshot below:

Convert Office/image to PDF and set PDF page number through GUI interface of VeryDOC Office to PDF Converter

Step3. Customize PDF page number

After adding source files, please click Setting on GUI interface so that you can edit PDF page number flexibly:

On pop Option panel, please click tab Page Number, then, click check-box Add page number to output file, and then, you can edit page number for beginning page number, page number position, page number Offset, dynamic page number, page number font, page number size, page number color, etc.. For instance, to set page number content of dynamic, you can click Macros > select one of popping options on dropdown list there, e.g., %PageCountRoman2%, and, when you finish setting here, please click OK so that these setting could be saved and program takes you back to GUI interface.

Here is related snapshot below:

Set PDF page number during convert Office/image to PDF through GUI interface

Step4. Convert image/Office to PDF

After you finish setting like above, please click Convert to PDF And Save As, and then, after you select right folder for targeting folder in pop dialog box, please click Ok so that VeryDOC Office to PDF Converter starts to help you convert image/Office to PDF with customized PDF page number. And later on, you can get PDF files in targeting folder.

Finally, thank you for reading this article, which is about how to customize PDF page number when converting image/Office to PDF through GUI interface. And if you have wills to buy full version of this software, welcome to click following icon:

Purchase VeryDOC Office to PDF Converter