VeryDOC Knowledge Base

The utility VeryPDF Image to PDF Converter could help you accomplish conversion from image to PDF with skew correct and despeckle effect on Windows platforms.

This application contains various versions – VeryPDF Image to PDF Converter, VeryPDF Image to PDF Converter Command Line, VeryPDF Image to PDF OCR Converter, VeryPDF Image to PDF OCR Converter Command Line, and VeryPDF Image to PDF COM. And different versions helps you in different aspects, e.g., VeryPDF Image to PDF OCR Converter allows you OCR image files to editable PDF files through VeryPDF OCR technology, and VeryPDF Image to PDF COM allows developers to integrate application to another platforms, etc.. For more information about VeryPDF Image to PDF Converter, please go to its homepage to know more.

Then, here are steps to use this software to convert image to skew correct and despeckle PDF file through GUI interface on Windows platforms:

First of all, trial version software needs to be downloaded from here, if you want to fulfill conversion by yourself through it:

Step1. Run software and add source image file

Please double-click shortcut to open GUI interface on your screen directly, and then follow steps below to add source image file:

Click Add File(s) on GUI interface > select right image files in pop dialog box > click Open directly, finally, source image file is added with its path displaying in processing form.

The following snapshot is about GUI interface of this application with added image file:

Step2. Set skew correct mode and despeckle PDF mode

After adding source file, please click setting on GUI interface, and then, there is a panel popping on screen. For us, we just need to click Base Setting tab there > click check-boxes Skew Correct and Despeckle in order to set skew correct and despeckle on produced PDF file later. And then, to save setting here, just click OK.

Here is snapshot about setting skew correct and despeckle on related panel below:

Step3. Convert image to despeckle and skew correct PDF

Finally, after finishing all basic work, just click Make PDF on GUI interface, and then select one of , and after that, program offers you another dialog box where you can set targeting folder, and after clicking Save/OK(single image added/dozens of images added), targeting PDF file can be produced with skew correct and despeckle.

Is this application awesome to convert image file to PDF? And you can notice there is watermark on produced PDF file, but if you need PDF file without watermark, just click following icon to get full version software:

Please do not hesitate to use VeryPDF Image to PDF Converter to batch convert image(PCD/PSD/TGA/BMP/DCX/PIC/WMF) to combined PDF files in Windows systems. 🙂

VeryPDF Image to PDF Converter supports converting image to PDF with multiple properties, e.g., PDF information, PDF encryption, PDF combination, PDF bookmarks, etc.. For more information about this software, just visit its homepage directly, or just download trial version from below to experience it by yourself, maybe through this process?

Download Entrance for Trial version:

After you get one piece trial software, just do the followings to realize your own process and experience this software, after you know there will be watermarks on produced PDF file:

Step1. Open software to add source image files

Please run software on screen, and on its opened GUI interface, please click File on toolbar > select Add Directory on pop list > select image folders one by one in pop dialog box > click OK, for this application supports various image files converted one time, and also supports drag and drop of adding image files, so you also could add PCD/PSD/TGA/BMP/DCX/PIC/WMF files one times for source image files and add image files quickly. 🙂

Here is snapshot about GUI interface after adding source image files below:

Step2. Set combined mode for PDF file

After adding source folders, please click Setting on GUI interface in order to set combined mode for PDF file:

Click tab Save Mode on pop panel, and then, click radio Convert multiple directories to multiple PDF files so that program knows you need to get added images of folders converted into separate PDF files.

And along with setting combined mode, you may need to set save mode in Save mode:

Click radio Always ask for filename so that program can provide you with dialog box when starting to convert later, for example. Also, you can choose other radios to get another saving mode. And here is snapshot about setting combined mode and saving mode on Setting panel below:

Then, click OK on this panel in order to save settings here directly.

Step3. Batch convert image(PCD/PSD/TGA/BMP/DCX/PIC/WMF) to combined PDF

After setting is finished as above, click Make PDF on GUI interface, and then, in pop list, please select one like what is shown to you from , and then, another dialog box pops on screen, where please set targeting folder and click ok, and along with processing based on VeryPDF Image to PDF Converter, combined PDF files from each added image folder could be produced into targeting folder directly.

And if you want to know how good produced combined PDF is, here is a screen snapshot example for you to refer to below:

For full version of VeryPDF Image to PDF Converter, welcome to click following icon:

For any questions on how to batch convert image(PCD/PSD/TGA/BMP/DCX/PIC/WMF) to combined PDF files, please drop your comments here. 🙂

This article aims to show you how to convert image to PDF(TIFF/JPEG/PNG/GIF/EMF to PDF) through GUI interface of VeryPDF Image to PDF Converter in Windows systems.

In this current software market, there are always many products filled in it, and then, a question arises: how could be select right product according to our need? However, here is my suggestion software to help you convert image file to PDF file with various options – VeryPDF Image to PDF Converter, and to know more features about this software, why not just get trial version to experience it by yourself?

First of all, please download trial version of this application from , and after you install it in your computer, it could be used in following steps by yourself. 🙂

Step1. Run software and add source image file

Please open software by double-clicking shortcut, then, GUI interface could be opened directly. And then, click Add File(s) > select image files in pop dialog box > click Open in there, then selected image files could be added as paths in processing form directly. To add files quickly, just drag and drag them into processing form directly, for this application supports drag and drop of adding files.

Here is snapshot about related operations as above below:

Step2. Convert image(TIFF/JPEG/PNG/GIF/EMF) to PDF

After adding image files, just click Make PDF on GUI interface, and then, click one option on pop list, e.g., Convert all image files with default options - , after you click Setting to set properties of produced PDF file, e.g, combined feature, etc.

And here is snapshot about Setting panel for you to set combined PDF below:

Then, after program gives you a dialog box which is as follows, please set targeting folder in there and click Save, and then, just a few seconds later, targeting PDF file could be produced into that folder.

Here is snapshot about dialog box for you to select targeting folder below:

Here is snapshot about produced PDF file from added image files of mine below for you to refer to:

And then, after simple operation description on how to use VeryPDF Image to PDF Converter to convert image(TIFF/JPEG/PNG/GIF/EMF) to PDF, to get full version application, please click following icon: