VeryDOC Knowledge Base

The application VeryPDF Image to PDF Converter helps you backup images and PDF during converting image to PDF through GUI interface on Windows platforms.

VeryPDF Image to PDF Converter not only allows you to convert image files to PDF files singly or in batches, but also backup images and PDF during process. This article enables you to know how to use GUI interface of this application to realize backup images and PDF when converting image files to PDF files.

Step1. Download and Install

Please download installer of this application from here:

Then, install trial version of this software in your computer by double-clicking this installer and following setup wizard step by step.

Step2. Open GUI interface and run monitor panel

After installation, just open its GUI interface on your screen, and then, click File on toolbar > select Monitor A Special Directory (Running) on pop list in order to monitor directory later.

Here is snapshot about how to open monitor panel through GUI interface below:

Step3. Start to backup images and PDF during converting image to PDF

After opening monitor panel, please add source folder containing various image files through clicking Add on this panel, then, type source folder path in edit-box Monitor Directory, or just click Browse there > select source folder and click OK so that source path of source folder can be shown in that edit-box.

Then, likely, to set targeting folder for backup files, please input targeting path in PDF output Directory edit-box, or click Browse to follow steps to add it there.

Finally, please click OK, and directly, source path and targeting path could display in processing form directly.

Here is snapshot about how to use monitor panel to set source path and targeting path below:

Finally, please click OK on monitor panel directly, and a second later, VeryPDF Image to PDF Converter starts to backup images and PDF during converting image files to PDF files, and in targeting folder you set, backup files of source images and targeting PDF files could be produced there. 🙂

Here is snapshot about produced backup files after converting image files to PDF files below:

And, as backup files, you can get source image files and targeting PDF files through removing suffix “.bak” directly, which is an easier way to store and obtain image and PDF files. 🙂

At the end of this article, please feel free to leave your comments here, if you have any questions on how to backup images and PDF during converting image files to PDF files through GUI interface.

And if you want to use full version of VeryPDF Image to PDF Converter, please click following icon:

VeryPDF Image to PDF Converter allows you to batch convert image to PDF with encryption on Windows platforms.

VeryPDF Image to PDF Converter is a powerful tool for Windows users to singly or batch convert various image files to PDF files with specific options, e.g., PDF encryption, PDF information, PDF bookmarks, PDF combination, etc.. And in the following paragraphs, I would like to illustrate how to use trial version software to batch convert various image files to encrypted PDF files one time:

First of all, just feel free to click following icon to download installer of this GUI application, and then, double-click this installer to install trial version in your computer directly.

Then, Open GUI interface on screen, and then, add source image files of same formats or various supported formats with this way:

Click Add File(s) on GUI interface > select image files in dialog box > click Open, then paths of images can appear in processing table directly. Or to get all various images added one time, just click File on toolbar > select Add Folder on pop list > select folder containing all images > click OK, which helps you add those images for process as paths of theirs in processing form, too.

Here is snapshot about GUI interface of this application with added image files below:

Then, please click Setting on GUI interface in order to encrypt PDF with this way:

Click tab Encrypt Options on pop panel, then, select check-box Encrypt PDF File so that following edit-boxes, radios, etc. can be activated directly. Then, to set PDF open password and owner password, just input them separately in their edit-boxes User Password and Master Password.

To encrypt PDF in specific encryption level, just click one of radios 40-bit RC4 and 128-bit RC4; to edit restriction for owner password, just click check-boxes No Printing, No Changing the Document, No Content Coping or Extraction and No Adding or Changing Form Fields.

Then, optionally, you can click tab Save Mode to set targeting folder, e.g.,   and . 🙂

Finally, click OK so that setting here can be saved directly. And here is snapshot about setting PDF encryption on pop panel below:

After you go back to GUI interface of this application, to set targeting folder and start batch conversion from image files to PDF files, just click Make PDF on GUI interface, and then, select one on , then, after you set targeting folder in pop dialog box and click OK, all added image files can be batch converted to PDF files accordingly.

Is it smooth to batch convert image files to encrypted PDF files with VeryPDF Image to PDF Converter? Anyway, to purchase full version of this application, just do not hesitate to click following icon:

Please feel free to use VeryPDF Image to PDF Converter to convert image to PDF and edit PDF bookmarks and PDF information through GUI interface in Windows systems.

You need to download installer of this application, then, follow setup wizard to install it in your computer, and here is download entrance:

After installation, just follow steps below to edit PDF bookmarks and PDF information when converting image to PDF through its GUI interface:

Step1. Open GUI interface and add source image file

Please double-click shortcut of this application, and after its GUI interface pops on screen, please click Add File(s) on GUI interface > select right PDF file in pop dialog box > click Open, then, selected PDF file could be added as path in processing table as below:

Step2. Set PDF bookmarks and PDF information in advance

After adding image, just click Setting on GUI interface in order to set PDF information and PDF bookmarks with this way:

• Click tab PDF Info > type PDF title, PDF subject, PDF author, PDF keywords in related edit-boxes directly in order to set PDF information
• Click Bookmarks tab > click check-box Use Bookmarks > select one of radios Use the page number as bookmarks, Use the short filename as bookmarks and Use the full filename as bookmarks in order to set PDF bookmarks flexibly

Here are snapshots about setting PDF information and PDF bookmarks below:

Finally, one click on OK helps you save settings here and close this panel.

Step3. Convert image file to PDF with PDF bookmarks and PDF information

After all basic work is done, just click Make PDF on GUI interface > select , and after you set targeting folder in pop dialog box, please click Save, so after VeryPDF Image to PDF Converter starts to process conversion of image file to PDF file, targeting PDF file with PDF bookmarks and PDF information could be produced into targeting folder directly.

Here is snapshot about produced PDF file with PDF bookmarks and PDF information below:

And to purchase full version of VeryPDF Image to PDF Converter, please click following icon:

Want to use GUI software to convert image to PDF with specific resolution/DPI? Then, please use VeryPDF Image to PDF Converter. 🙂

VeryPDF Image to PDF Converter enables conversion from various files of image file to PDF files singly or in batches on Windows platforms. Moreover, this application contains several versions, including GUI, CMD and COM, also for image to editable PDF files, you can also use OCR version. But in the following paragraphs, the method to use GUI version of this application could be shown to you in details, and first of all, to follow me to do it by yourself, just feel free to download trial version software right now:

Step1. Open software and add image files

Run software on your screen, then click Add File(s) on GUI interface > select image files you want to convert in pop dialog box > click Open, and after paths appears in processing form, it is successful to add them for process later. The following snapshot uncovers GUI interface with added files:

To preview added image files one by one, just click paths one by one directly in processing form, which leads to preview of image popping on preview panel directly. 😉

Step2. Specify PDF resolution/DPI for PDF

After source adding, click Setting on GUI interface > select tab Base Setting on pop panel, and then, do the followings to edit PDF resolution/DPI directly:

Click one of options on pop list PDF DPI Setting, e.g., default, 72, 300, 600; however, this tool supports customizing resolution directly, so integer value in edit-box PDF DPI Setting could work later, e.g., 700 could be typed there, etc..

Here is snapshot about editing PDF resolution/DPI on pop panel:

Then, click OK on this panel in order to save setting and close this panel to go back to GUI interface.

Step3. Convert image file to PDF with specific resolution/DPI

After setting, please click Make PDF on GUI interface so that after you select one of , and set targeting folder in pop dialog box, just click OK, then, later on, targeting PDF file with specific PDF resolution/DPI is produced. 🙂

Is it qualified of produced PDF file to you after your own conversion from image file to PDF file? Anyway, for full version of VeryPDF Image to PDF Converter, please click following icon:

For other trial versions software, please click following icon to get them separately: